Type: Driver
File Name:
File Size: 16.5 MB
8 (3.4)
Downloads: 6
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now

Overclocking refers to running a component at a speed greater than it was designed for. This gives enhanced performance but often at Aopen AX3SP-U SilentTek expense of decreased stability. This site maintains listings of network drivers available on the web, organized by company.


Includes Aopen AX3SP-U SilentTek to useful resources. PC maintenance article - It s a brush based fan, which means it makes noise -particularly when it s cold at bootup. Some also want to replace it to get better cooling. The most common way of doing this for most chipsets is to use a Blue Orb chipset cooler. To start the mod, I removed the old fan. You have to be careful when taking it off, because the back of the board has a lot of leads which can be scratched easily. Just use a needle nose pliers to clamp the plastic and push it through the hole. Aopen AX3SP-U SilentTek fan will then remove with ease.

Be careful not to scratch the leads on the back of the board I was surprised to find that Abit actually used thermal compound although a very small amount between the chipset fan and the Northbridge.

I didn t think there would be any kind of material there at all. Not much thermal compound Then I attached the Blue Orb. I soon found out that the Blue Orb does not fit on the KT7.


Because of this, the Blue Orb is Aopen AX3SP-U SilentTek by about half a centimeter. I tried bending it and forcing it on the board for about thirty minutes to no avail. There is simply no possible way to get it to fit. Of course you can juse use thermal tape on the bottom without clamping the unit down, but this defeats the purpose of getting the added cooling of the Blorb.

Apple BdContacts').f(b.get(["POPULAR_CATEGORIES"],!1),b,"h",["s"]).w("
ASUS A6JeAopen AX3SP-U SilentTek Utility 3.0.09

I then tried to mount the Blue Orb s fan on the KT7 s heatsink, since it was obvious the Blorb s fan was a tad better. This also was impossible to accomplish without some serious modification.

The screws just don t line up, and it s impossible to force the screws into the heatsink believe me I tried. Mounting the fan on the KT7 s heatsink won t work It is a good idea to take off Aopen AX3SP-U SilentTek current heatsink and fan on the KT7 s Northbridge.

Aopen AX3S Pro Motherboards > Downloads Free! Drivers, Utilities, Manual and BIOS

Abit didn t use very much thermal paste at all. It s a good idea to take it off and put a new thin layer of paste over the chip. It s possible this could further increase Aopen AX3SP-U SilentTek of the board, possibly allowing you to raise the FSB higher. Since users have asked exactly how to remove the BIOS chip from the board, I have put together a short little guide.


The BIOS chip Aopen AX3SP-U SilentTek located on the bottom left of the board. The writing on the chip not the sticker reads from the LEFT Aopen AX3SP-U SilentTek of the board - remember this when you put it back in. The chip is in it s socket rather securely. It s not possible to just lift the chip out with your fingers.

Download Drivers

You will need to use a flathead screwdriver to pry the chip off. If you get a lot of resistance, chances are you are trying to pry the BIOS chip s socket off the motherboard, and Aopen AX3SP-U SilentTek the BIOS chip out of it s socket.

The chip will pop right out. Be careful when prying because if you pry a little too far the end pins will start to bend. If this happens, just bend them back. It s obviously better to avoid the situation all together by simply prying the chip off from Aopen AX3SP-U SilentTek ends evenly.

検索 - Search

When you re ready to reinsert the chip just place it on the BIOS socket and push it down. It will take a little force, but again don t apply Aopen AX3SP-U SilentTek much. If it isn t going in make sure all the pins are properly lined up. Like I mentioned above, make sure the writing on the chip reads from the left side of the motherboard, because it WILL fit in both ways, and it WILL fry if you put it in the wrong way. You might also check out our gigantic KT forum if you have any questions or concerns. Free Download Aopen AX3SP-U SilentTek Utility (Other Drivers & Tools). Скачать драйвер Aopen AX3SP-U SilentTek Utility бесплатно. # Operates in Windows 98SE/ME/NT//XP to monitor Power Supply Voltage, CPU.

Related Posts