UBIQUITI UAP-OUTDOOR+ ACCESS POINT DRIVER DETAILS:
|File Size:||37.7 MB|
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* (*Free Registration Required)|
UBIQUITI UAP-OUTDOOR+ ACCESS POINT DRIVER
Oops! The request page was not found
While the Ubiquiti UAP-Outdoor+ Access Point is quite plain, the back of the VigorAP RP is lot more crowded because of the protruded fins, but they have a key role into maintaining the temperature as low as possible and, thanks to the alloy case, the device remained cool even when it was put under stress. Between the two sets of LEDs, there is a small recessed Reset button to return the device to the default factory settings. In order to install the unit, you have to remove the covers to reveal the two ports — as said before, Ubiquiti UAP-Outdoor+ Access Point second should only be used to connect additional wired clientsinsert an Ethernet cable into the LAN PoE port middle port and the other end of the cable to the PoE injector and plug the Power cord into the DC port of the PoE injector.
Afterwards, in order to configure the device, you Ubiquiti UAP-Outdoor+ Access Point to plug another Ethernet cable to the PoE injector and into a computer. Since this type of devices are rarely used as a standalone, a controller is a necessity when you have to deploy multiple access point on various sites and, thankfully, the VigorAP RP can indeed be adopted within a larger environment containing not only access points, but also Vigor routers.
Ubiquiti UAP-Outdoor+ Access Point received, things remained less user-friendly, since I had to also install OpenJDK and MariaDB and, once everything was installed, I could choose between local and remote. Choosing the former for testing purposes did not finish the process, since, I also had to go to the Vigor ACS 2 interface the controller and to the standalone interface and pair them read the full review for instructions. Inside the device, DrayTek has implemented a buzzer to let you know where the AP is located. The DrayTek VigorAP RP has a large coverage and I could connect to the network even at about feet, but, depending on your devices, you may not want to go beyond feet because smartphones and tablets are limited by the FCC regulation for public exposure.
Obviously, the less noise and interferences, the better the signal and range in an area with lots of trees, buildings and other 2. Further out to about feet, I measured an average of 8.
That being said, the new ePMP hardware has been very favourably received by the public and one of the most popular device from this line is the Cambium ePMP 5GHz Smart Outdoor Access Point which, besides being a reliable rugged outdoor-suitable device, it prides itself with a significant amount of enterprise-type features, from which two attract the most attention: Cambium offers lots of free courses, as well as Certification Training. The ePMP access point has Ubiquiti UAP-Outdoor+ Access Point some serious design changes from the last generation the ePMPthe case now being rectangular and with very soft rounded corners while the ePMP AP had a significant curve towards the bottom and, while it kept the same carved logo, the indicators are now gone from the front of the device the ePMP AP is covered entirely by a white matte finish and it does not retain any fingerprints.
There are also some changes in size, although nothing significant, as the ePMP access point measures 8. If it is unused, you can cover the top side of the device with an environmental plastic cover included in the package. After removing the bottom section, you gain access to a Smart Antenna V port, a GPS Antenna connector SMA, femalea Reset button useful for either resetting the device or for returning the access point to factory default settingsa Gigabit Ethernet port can be used for establishing a connection to a computer for management, as well as for PoE power input — the device is Furthermore, the number one enemy of any outdoor access point is the lightning strike, so you need to take some measures to make sure you keep your equipment safe although no precautions can completely guarantee that it will survive a lightning strike: Another potentially damaging weather element is the sub-freezing temperature and thankfully, Cambium has taken the necessary measures so the access point will survive the ePMP AP features a 1 Joule Integrated Surge Protection.
Additionally, the outdoors access point features an IP55 rating, so it has a limited protection from dust ingress. In case of heavy rain, you can expect that both the Sector Antenna and Smart Antenna which are a reliable addition to the standard access point will suffer from the Rain Fade phenomenon the microwave radio frequency signal gets absorbed by the rain or snowso you will experience a lower RSSI. As already pointed out, besides the access point, the Cambium ePMP series also features a Smart Ubiquiti UAP-Outdoor+ Access Point needed in order for the user to take advantage of the Smart Beamforming feature and a Sector Antenna, which offers a useful compact mounting system for both the access point and for the smart antenna and it features a front-to-back ratio of 35db and a wide frequency range.
This way, you gain access to the web interface by opening a web browser and going to Regardless of that, you can replace the built-in antenna with a omni-directional one. Inside the package, besides the unit, there is a passive PoE adapter, a power cord, an Installation Guide and some pole mounting straps. Ideally, you will mount the device on a pole using the included straps and you should not be scared by its dimensions. I know that from the pictures, it looks huge, but, in reality, you get 8.
Ubiquiti UniFi Outdoor Access Points
On the left side of the device, there is an array of LED lights that show the status of your system: The hardware installation requires that you remove the cover to reveal the ports, take an Ethernet cable and connect one end to the LAN0 from the AP and the other end to the PoE injector you get up to feet Power over Ethernet deployment and connect the Power cable to the PoE injector and to the wall outlet. Lastly, take another Ethernet cable and insert one end to the LAN port on the injector and the other to a computer, in order to initiate the configuration process there is Ubiquiti UAP-Outdoor+ Access Point mobile possibility to configure the device.
Afterwards, you will be prompted to enter the user name and password admin for both and click Login immediately after Ubiquiti UAP-Outdoor+ Access Point get to change the default password and user name. UniFi Access Point outdoor models have a form factor built to last outdoors. The UniFi Enterprise WiFi System includes the UniFi Controller software.
Outdoor n Access Point. Featuring Wi-Fi n, the UniFi® AP-Outdoor is ideal for outdoor deployment.
The UniFi AP-Outdoor+ model operates in the.