Type: Driver
File Name:
File Size: 8.6 MB
16 (4.88)
Downloads: 11
Supported systems: Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10
Price: Free* (*Free Registration Required)

Download Now

Download Broadsoft Snom IP Phone Firmware a for OS Independent

Default value is off. All combinations are now possible on snom - display of audio icons solely dependent on configuration parameter audio device indicator - new configuration parameter auto reboot on setting change to enable new auto reboot feature but preserve old behaviour if needed; IMPORTANT: Broadsoft Snom300 IP Phone you experience a constanly rebooting phone set the log level to 7 and see via syslog server which configuration parameter causes the loop. With use hidden tags enabled you can do a distinct subset of GET requests with parameters only which are needed for the normal usage of the Web User Interface WUI no direct dialing, no remote control is available if enabled. The LED is controlled Broadsoft Snom300 IP Phone the dialog state like in the Extension mode, while the key is controlled by the Speed Dial nature.


In other words, no matter what the LED is doing, pushing that button will always dial the speed dial number. Now, it slowly fades and turns off competely with the on configuration parameter default. The previous behaviour has also been preserved where Broadsoft Snom300 IP Phone light fades slowly and remains dimly lit without completely turning off. That configuration parameter option is now called dim.

Broadsoft Snom300 IP Phone old speaker phone behaviour is still available by using the room type quiet room, instead of echoic room - fixed RTCP jitter buffer calculation fixed problem in the calculation of jitter buffer stat only at the beginning of a call - fixed an RTCP problem with packet loss field fixed problem with packet loss field in the very first RTCP packet sent out by the phone in certain scenarios only, it was showing some packets lost when none had Installation Instructions: Because the phone is required to seize the line before using it when it is provisioned with a shared line on a BroadWorks server, the phone will look for an idle shared line key associated with this line when it is taken off-hook in the idle state.

If none is found because all are busythe off-hook event is ignored and the user hears silence. Hearing silence after lifting the headset or pressing a shared line key therefore means one of two things: Either the line is unavailable, i. On the other hand, if the user hears busy tone after going off-hook, this indicates that either a race condition has occurred where two endpoints try to seize the same call appearance at the same time, or the endpoint is not authorized to use the shared line the text "Forbidden" should be displayed in this case. The dial tone, therefore, in the context of SCA, is a true dial tone in the traditional sense: Public and Private Hold The BroadWorks SCA feature allows a call that was put on hold by one endpoint to be retrieved by any other endpoint sharing the same line. When a call is put on public hold, other endpoints that share the line may retrieve the call.

When a call is put on private hold, it can be retrieved only by the endpoint that prevoiusly put the call on hold, not by others sharing the same line.


There are two methods for placing a call on hold: Attempting to retrieve a privately held call from another endpoint will Broadsoft Snom300 IP Phone busy tone and an error message is displayed. Shared Call Appearance Bridging Starting with release 14 of the BroadWorks application server, the SCA feature allows a second endpoint to barge in on an existing call on the shared line.


This feature is called Shared Call Appearance Bridging. It must be enabled for the shared line on the BroadWorks server.

  • Interoperability/PBX/Broadsoft - Snom User Wiki
  • Firmware/Broadsoft - Snom User Wiki
  • Broadsoft Snom Ip Phone Firmware Driver Download
  • Broadsoft Snom300 Ip Phone Firmware Driver Download
  • Interoperability/PBX/Broadsoft

The feature is invoked by pressing the shared line key associated with the active call appearance as indicated by a steadily lit LED. If the feature is enabled on the BroadWorks server, a three-way call is established; Broadsoft Snom300 IP Phone the feature is disabled, busy tone is applied and an error message is displayed "Forbidden".

Download Broadsoft Snom IP Phone Firmware for OS Independent

When the shared line is in the seized or ringing state the LED associated with this call appearance Broadsoft Snom300 IP Phone the other endpoints sharing the line will also be steadily lit. Pressing the shared line key in this state on one of the other endpoints will have no effect.

Provisioning Provisioning the SCA feature requires the following steps: The result of the provisioning will be a primary line with the SCA activated plus a number of secondary devices that share the line, each Broadsoft Snom300 IP Phone by its own unique SIP URI. Provisioning the Shared Line on the snom Phone Note that it is transparent to the snom phone whether it is a primary or secondary device on the shared line.


Assign Call Appearances 1. Configure Broadsoft server to enable shared line. Register the shared lines on different phones. Enable the shared line. Choose the "Broadsoft" server type.

Configure the shared line phone feature key on different phones. Bugfix: initial RTP-keep-alive packet was missing, is send out now except MetaSwitch is chosen as SIP server type (SCCP-XXX) - network for some phones. Features: support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just.

Related Posts