CONNECTBLUE CB-OBS419 BLUETOOTH SERIAL PORT ADAPTER DRIVER DETAILS:
|File Size:||12.5 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
CONNECTBLUE CB-OBS419 BLUETOOTH SERIAL PORT ADAPTER DRIVER
Besides being widely supported, it also has the stability and range needed for a reliable console connection. Very useful when the system is located on the roof top!
Adding a wireless connection To make the console wireless a ready-to-use Bluetooth Classic device with the serial port profile is needed. It is a ready-to-use Classic Bluetooth serial port module with a simple configuration interface. The cB-OBSi can be found on e. Must be open drain collector. Not used on cb This pin is also used to select Logic level mode instead of RS for connectblue product with internal RS driver. High Reserved, do not connect. Read the safety notes in chapter 8 before using the modules. An external reset source must be open drain collector, see section A.
For information on how to suppress the flashes see section A ConnectBlue cB-OBS419 Bluetooth Serial Port Adapter signal can be set to indicate an active Bluetooth link.
Version 21 4 Antennas 4. Version 22 5 Mounting Information 5. The J2 pads are longer to fit both the single and double row ASP connectors see section 5. Some of the not used pads of J3 are not visible Version 23 5. The outer tangents of the 2.
Plattan i Mattan: Adding Bluetooth as console connection on Raspberry Pi
Choose the outer tangent CC distance The recommended manufacture is Samtec with many connector options available; see section and Chapter 2 contains more information about the connector and the electrical interface Suitable One-Piece Part Connectors Single row connectors These connectors are a single row connector and can be used if only J2 is needed. This connector has a profile height of 1.
There are alignment pins on the bottom side of the connector. The connector is available with M2 threaded inserts that fit the mounting holes on the board see section 5.
connectBlue cB-OBS419 Bluetooth Serial Port Adapter If you want to have a tighter and more secure mounting, you may use longer screws and secure it using a nut on the backside of the motherboard. Another way to mount the module is to use press-fit nuts on the motherboard and skip the M2 threads on the connector, see section 5. Single row connectors from Samtec. When ordering connectors from Samtec or an official Samtec distributor, please use the ASP order number and refer to the connectblue global quote number for best price.
For technical questions regarding the Samtec connectors please contact connectblue or Samtec at See Figure 5 for more information about the connector and necessary measurements on the motherboard. The large mounting holes on the motherboard are designed for press-fit nuts and could be smaller if press-fit nuts are not used.
CB September2013 news
The mounting holes are aligned with the outer tangent of the 2. Version 25 Figure 5: Host PCB layout [mm] for single row connector. Version 26 Double row connectors This connector is a double row connector and can be used if both J2 and J3 are needed. Enable low energy Bluetooth address mode(AT*AGLB).
Service connectBlue Serial Port Adapter products.  . cB-OBS protocol for the serial port to enable individual control of a Bluetooth channel. connectBlue Module Standard Specification  cB Serial Port Adapter Toolbox: A PC program for easy getting started and configuration.